| Engine | Kirloskar make water-cooled electric start diesel engine, Model 4R1190NA1, 74.5 hp (54.8 kW) @ 2200 rpm or equivalent |
| Electrical System | 12 V DC |
| Emission Standard | BS-IV |
| Speed Reduction Gearbox | Two speed reduction gearbox to achieve low speed for paving and high speed for traveling |
| Laying suitability | Option 1: Bituminous material Option 2: Bituminous, Wet mix, GSB, DLC, DBM material (Dual Purpose) |
| Laying Capacity | 125 TPH |
| Laying Thickness | 200 mm (Max) to 10 mm (Min)8″ (Max) to 3/8″ (Min) |
| Transmission | Hydrostatic |
| Working Speed | 0 to 36 m/min (Max.) |
| Travelling Speed | 0 to 17 km/hr (Max.) |
| Weight | 10,400 kg (22,930 lb.) approx. |
| Slope & Grade Control | Manual Mode |
| Maintenance Shutters | On two side of machine |
| Traction & Conveyor Pump – Motor | Danfoss Power Solutions, Germany or equivalent |
| Screed width | 2.5 m (8’ 2½”) basic width, Hydraulically extendable up to 4.5 m (14’ 9 1/8”) |
| Crown (Manual) | -1° / +4° |
| Screed Heating | Yes, with 8 LPG burner facility |
| Screed Vibration | Yes |
| Screed Tamping | No. Available on request |
| Rear Wheel | Two no. Pneumatic Tyre Size: 12.00 x 20 |
| Front Wheel | Two no. Solid Rubber Tyre 550 Dia. x 300 mm wide |
| Fuel | 142 L (37.5 gal) |
| Hydraulic Oil | 240 L (63.4 gal) |
| Cooling System | 8.0 L (2.1 gal) |
| Engine Oil | 13.0 L (3.4 gal) |
| Control Panel Type | Sliding |
| Operator Seat | Double Operator Seat |
| Travelling Function | Left & Right side |
| Operating Function | Left & Right side |
| Steering | Hydraulic |
| Brake | Service Brake: Caliper disc brake on both the sides Secondary Brake: Hydraulic Type Parking Brake: Caliper disc brake |
| Conveyor & Auger | 2 Sets, one on each side |
| Conveyor Drive | Hydraulic |
| Conveyor Control | A. ON / OFF on operator panel B. Auto from operator panel C. Manual override on screed panel D. Reverse conveyor operation from main control panel |
| Auger Screw Size | Dia 250 mm (10″) |
| Auger Material | Ni-Hard / High Chromium Steel Material |
| Hopper Operation | Hydraulic |
| Hopper Capacity | 4.25 m3 (151 ft3) |
| Hopper Width | Working: 3.22 m (10′ 6 3⁄4″)
Closed:2.44 m (8′ 1/8″) |
| Feed Tunnel Width | 1.28 m (4′ 2 3/8″) |
| Operating Height | 3.12 m (10′ 2 7⁄8″) |
| Shipping Height (canopy tilted) | 2.58 m (8′ 5 5⁄8″) |
| (w/o canopy & exhaust) | 2.46 m (8′ 7⁄8″) |
| Shipping Width | 2.56 m (8′ 4 3⁄4″) |
| Length (Tractor unit + screed) | 5.69 m (18′ 8″) |
| Wheel Base | 2.57 m (8′ 5 1⁄8″) |
| Dump Height | 0.74 m (2′ 5 1⁄8″) |
| Thrust Roller Height | 0.65 m (2′ 1 5⁄8″) |
Canvas Canopy; Working & Traveling Lights; Tool Kit with Jack; Horn
All operating levers including panel switch board are handy and within easy reach; All gears and shafts of gear box are made from alloy steel and are hardened and ground for efficient working; Screed is vibrated with hydraulic motor to compact laid layer; All jacks are having same kind of seal kit (Piston seal and rod seal of PU material).
